Showing posts with label sp-1. Show all posts
Showing posts with label sp-1. Show all posts

Wednesday, February 3, 2021

Vespel SP-1 Rods & Plaque
DuPont Vespel® polyimide shapes (Sheets, Rods, Tubes, Parts) are produced from advanced polymers developed by DuPont. Vespel® polyimide combines High-Temperature Performance, Natural Lubricity, Dimensional Stability, Chemical Resistance, Creep Resistance, and more.   

Vespel® does not outgas or melt at any temperature & performs well in vacuum applications, even in extremely low cryogenic temperatures.


Vespel® polyimide is available in five standard grades: 

Vespel® SP-1 - Unfilled. Maximum strength & elongation. Lowest modulus & thermal conductivity. Optimum electrical properties. 
Vespel® SP-21 - 15% graphite (by weight). Enhances inherent wear resistance, improves long term thermal stability. 
Vespel® SP-22 - 40% graphite (by weight). Gives low coefficient of thermal expansion. Maximum creep resistance. 
Vespel® SP-211 - 15% graphite and 10% TEFLON® fluorocarbon resin (by weight). Lowest static friction. 
Vespel® SP-3 - 15% MoS2 (by weight). Best wear performance in dry environments. 

For the full-range of Vespel products, visit https://www.professionalplastics.com/Vespel  or call (888) 995-7767.

Wednesday, May 26, 2010

Meldin Replacing Vespel in Semicon Applications

Meldin® 7001 Polyimide Replacing Vespel® SP-1 in Semiconductor Applications


Meldin® 7001 polyimide is replacing Vespel® SP-1 in an expanding number of semiconductor applications including Wafer Processing, Handling and IC Testing components. Meldin provides a combination of high-performance properties and superior economical performance.


Meldin® 7001 is ideal for electrical and thermal insulating applications. In Semiconductor Wafer Processing applications, the plasma etch rate of Meldin® 7001 is lower than Vespel® SP-1 providing superior performance over time. In IC Test Sockets & Probe Test Heads, Meldin® 7001 has replaced more expensive Vespel® SP-1 while meeting the same performance standards for precision micro-drilling and long-term stability.


Meldin® 7001 products feature operational temperatures of 500ºF (260ºF) for continuous operation and 900ºF for intermittent exposure, and tight tolerances of ±0.001 in. on both ODs and IDs. Meldin 7001 is suitable for high-temperature structural, high-purity semiconductor components.

Click Here To Learn More: http://www.professionalplastics.com/MELDIN7001

Meldin® 7001 Features & Benefits:
* Ultra Clean (High-Purity)
* Low Outgassing
* Low Dielectric Properties
* Easy To Machine & Very Stable
* Does Not Melt



PROFESSIONAL PLASTICS, INC. - Global Supplier of Polyimide Shapes 
USA Customers, call (888) 995-7767, or e-mail us at sales@proplas.com
Asia Customers, call +(65) 6266-6193
All others, call (858) 637-2801


Main E-Mail: sales@proplas.comAsia E-Mail: asia-sales@proplas.com

Meldin® is a registered trade name of Saint Gobain Performance Products and is distributed by Professional Plastics in the United States and Southeast Asia. Vespel® is a registered trade name of E.I. DuPont DeNemours.

Statements are based on typical properties and customer feedback, as well as, manufacturer provided descriptions and technical data. This information should not be considered as the sole basis of material specification. Customers should approve materials based on first-hand experience in each application. Professional Plastics supplies this information without liability and makes no statement of responsibility regarding the suitability of this or any other material in a specific application.

Tuesday, December 22, 2009

Vespel® polyimide shapes by DuPont are available online

Vespel® polyimide shapes are produced from advanced polymers developed by DuPont. Vespel® polyimide combines High-Temperature Performance, Natural Lubricity, Dimensional Stability, Chemical Resistance, Creep Resistance, and more.


Vespel® does not outgas or melt at any temperature & performs well in vacuum applications, even in extremely low cryogenic temperatures.

Vespel® polyimide is available in five standard grades:

•Vespel® SP-1 - Unfilled. Maximum strength & elongation: lowest modulus & thermal conductivity: optimum electrical properties.
•Vespel® SP-21 - 15% graphite (by weight). Enhances inherent wear resistance, improves long term thermal stability.
•Vespel® SP-22 - 40% graphite (by weight). Gives low coefficient of thermal expansion. Maximum creep resistance.
•Vespel® SP-211 - 15% graphite and 10% TEFLON® fluorocarbon resin (by weight). Lowest static friction.
•Vespel® SP-3 - 15% MoS2 (by weight). Best wear performance in dry environments. Dupont Vespel®

For more details visit Professional Plastics' Website or call (888) 995-7767.

Monday, December 21, 2009

Polyimide Shapes - Vespel®, Meldin® & Plavis®

Polyimide ( PI ) is a polymer of imide monomers. Thermosetting polyimides are commercially available as stock shapes, thin sheets, laminates and machined parts. Thermosetting polyimides are known for thermal stability, good chemical resistance, and excellent mechanical properties. Thermoset polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of 450°F (232°C) and for short excursions, as high as 900°F (482°C). Molded polyimide parts and laminates have very good heat resistance. Normal operating temperatures for such parts and laminates range from cryogenic to those exceeding 500°F (260°C). Polyimides are also inherently resistant to flame combustion and do not usually need to be mixed with flame retardants. Most carry a UL rating of VTM-0.


Polyimide shapes are produced via Isostatic Molding, Compression Molding or Direct-Forming. Polyimide materials are lightweight, flexible, resistant to heat and chemicals. Therefore, they are used in the electronics industry for flexible cables, as an insulating film on magnet wire and for medical tubing. The semiconductor industry uses polyimide for components such as Clamp Rings, Screws, Seals and Wafer Handling Components.

Professional Plastics offers a full line of polyimide shapes including:
Vespel® Polyimide from Dupont
Meldin® Polyimide from Saint Gobain
Plavis® Polyimide from Daelim
Kapton® polyimide film from DuPont

For more information visit http://www.professionalplastics.com/ or call 1-888-995-7767