Nylatron® GS Nylon Sheets and Rods Available Online

Professional Plastics offers Nylatron® GS Nylon Sheets and Rods from their e-commerce website in a full range of sizes.  Nylatron® GS is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity when compared to unfilled Nylon. Nylatron GS provides a lower coefficient of linear thermal expansion than Nylon 101 . Nylatron materials can be extruded or cast into basic shapes for machining.  Nylatron GS is the Extruded Grade which is best for smaller parts, while Nylatron GSM is the Cast Grade which is more suitable for large parts. Both grades are available from Professional Plastics website.

Nylatron GS parts maintain better fit and clearances than unfilled Nylon and have less tendency to seize as bearings.   This material is economical and easy to machine into complex parts.

Nylatron GS Rods are available in standard 8 foot lengths.
Nylatron GS Sheets are available in standard 24" x 48" sheets or can cut-to-size to customer specifications upon request.


Nylatron® is a registered trade name of Quadrant EPP - supply partner to Professional Plastics, Inc.

For more information, contact Professional Plastics, Inc. at (888) 995-7767 or E-Mail sales@proplas.com
Order Online at http://www.professionalplastics.com/NYLATRONGS

Vespel® polyimide shapes by DuPont are available online

Vespel® polyimide shapes are produced from advanced polymers developed by DuPont. Vespel® polyimide combines High-Temperature Performance, Natural Lubricity, Dimensional Stability, Chemical Resistance, Creep Resistance, and more.

Vespel® does not outgas or melt at any temperature & performs well in vacuum applications, even in extremely low cryogenic temperatures.

Vespel® polyimide is available in five standard grades:

•Vespel® SP-1 - Unfilled. Maximum strength & elongation: lowest modulus & thermal conductivity: optimum electrical properties.

•Vespel® SP-21 - 15% graphite (by weight). Enhances inherent wear resistance, improves long term thermal stability.
•Vespel® SP-22 - 40% graphite (by weight). Gives low coefficient of thermal expansion. Maximum creep resistance.
•Vespel® SP-211 - 15% graphite and 10% TEFLON® fluorocarbon resin (by weight). Lowest static friction.
•Vespel® SP-3 - 15% MoS2 (by weight). Best wear performance in dry environments. Dupont Vespel®

For more details visit Professional Plastics' Website or call (888) 995-7767.

Tygon® 2075 Ultra Chemical Resistant Tubing

Tygon® 2075 Ultra Chemical Resistant Tubing offers an unequaled combination of chemical resistance, clarity and flexibility. Tygon® Ultra Chemical Resistant Tubing is virtually unaffected by acids, bases, ketones, salts and alcohols, fitting the requirements of many applications from battery acid filling to hazardous material handling. It's entirely plasticizer-free, eliminating fluid contamination and the premature embrittlement and cracking common with many flexible tubings. Its exceptionally smooth inner surface inhibits particulate buildup and reduces the potential for contamination.

For more details, click here: Tygon® 2075 Ultra Chemical Resistant Tubing
 
To request a quote, call (888) 995-7767 or e-mail sales@proplas.com

Polyimide Shapes - Vespel®, Meldin® & Plavis®

Polyimide ( PI ) is a polymer of imide monomers. Thermosetting polyimides are commercially available as stock shapes, thin sheets, laminates and machined parts. Thermosetting polyimides are known for thermal stability, good chemical resistance, and excellent mechanical properties. Thermoset polyimides exhibit very low creep and high tensile strength. These properties are maintained during continuous use to temperatures of 450°F (232°C) and for short excursions, as high as 900°F (482°C). Molded polyimide parts and laminates have very good heat resistance. Normal operating temperatures for such parts and laminates range from cryogenic to those exceeding 500°F (260°C). Polyimides are also inherently resistant to flame combustion and do not usually need to be mixed with flame retardants. Most carry a UL rating of VTM-0.

Polyimide shapes are produced via Isostatic Molding, Compression Molding or Direct-Forming. Polyimide materials are lightweight, flexible, resistant to heat and chemicals. Therefore, they are used in the electronics industry for flexible cables, as an insulating film on magnet wire and for medical tubing. The semiconductor industry uses polyimide for components such as Clamp Rings, Screws, Seals and Wafer Handling Components.

Professional Plastics offers a full line of polyimide shapes including:
Vespel® Polyimide from Dupont
Meldin® Polyimide from Saint Gobain
Plavis® Polyimide from Daelim
Kapton® polyimide film from DuPont

For more information visit http://www.professionalplastics.com/ or call 1-888-995-7767