Showing posts with label Quadrant. Show all posts
Showing posts with label Quadrant. Show all posts

Wednesday, September 19, 2012


Why Designers Continue To Replace Metal Parts With Engineering Plastics


Mechanical engineers and designers are increasingly replacing existing metals parts with components made from engineering plastics. A common misconception is that this trend is based purely on reducing the initial cost per part, but the reality is quite different. Engineering plastics are often more expensive than metals, but provide benefits such as improved performance, longer part life, and reduced downtime. This long-term, “overall cost of ownership” approach is driving a strong market for engineered plastic solutions.


Here are a few of the product features and benefits that are driving the trend towards increased use of engineering plastics.

Wear Resistance
In high-wear applications, many plastic materials will outperform brass & other metal bearing materials. Plastics such as Nylon, UHMW, PTFE, Acetal and Turcite® offer natural lubricity to increase wear resistance and extend the part life of bearings, rollers, gears, and seals.

Lightweight
When replacing metal parts, plastics will typically reduce the part weight by 30% to 50%.This can translate to significant energy savings when used in applications such as transportation, linear motion, and material handling.

Temperature Resistance
Plastics, ceramics, and composites have been developed which resist both extremely high & extremely low cryogenic temperature ranges with minimal loss of mechanical properties. Materials such as Celazole® PBI can continually operate at up to 750°F, while materials such as Kel-F® PCTFE can operate at -400°F.

Impact Resistance & Shock Absorption
Many plastics and composites offer excellent impact resistance. Materials such as Polycarbonate are used for impact-resistant glazing and shields. Nylon and Polyurethane will absorb impact shock and isolate stress points to protect surrounding components.

Insulation Properties
Many plastics have excellent insulation properties, reducing heat, and improving product reliability. Laminates such as G-10/FR-4, GPO-3 and LE Phenolic are used extensively in electrical and transportation industries to insulate from heat and electrical shock. Thermoplastics such as PTFE and Meldin® work well in high-temperature insulating applications.

Corrosion Resistance
Metals are inherently susceptible to corrosion from moisture, acids, and organic solvents. Many plastics were designed specifically to combat these problems. Materials such as PVC, CPVC, Polypropylene, and PTFE offer superior corrosion resistance at an economical price.

Medical Approval
Many plastics have been approved for use in medical applications ranging from heart pump valves to endoscopic instruments. Products meet FDA, USP Class VI, and ISO 10993 standards. Such materials include Radel®, PEEK, Ultem®, and Polycarbonate.

Fire Safe
Dozens of plastic materials have been developed to meet common aircraft, transportation, semiconductor, and UL ratings for flame and smoke safety. Specifications include FAR, FTA, FRA, ASTM, UL and FM. In the semiconductor industry materials meeting the FM-4910 specification have reduced or eliminated the need for costly fire-suppression systems, and thus have reduced overall equipment costs. In some cases, the use of these materials have even reduced insurance costs in high-liability applications. Common flame-retardant and flame-safe materials include: Kydex®, Boltaron®, Halar®, CP7-D, FRPP, Corzan® CPVC, and Kynar® 740 PVDF.

High Purity
Plastics have long been a crucial product used in the manufacturing of high-purity fluid & gas handling applications. Many plastics have eliminated the concerns of out-gassing, leaching, and other contamination in crucial high-purity systems. These products include: PTFE, PFA, FEP, Halar® and Kynar® PVDF.

Static Control
Several plastics and composites have anti-static qualities to prevent the build up of an electric charge. Products range from conductive materials 10^2-10^6, and static dissipative 10^6-10^10, to highly resistive materials 10^10-10^12.


REQUEST A QUOTE!



To learn more, contact Professional Plastics, Inc. or please visit www.professionalplastics.com

Tuesday, April 24, 2012

Professional Plastics Opens New Site in Smyrna, Georgia

Professional Plastics, a California-based supplier of plastic sheets, rods, tubing and films has opened their 16th USA warehouse-distribution center in the Atlanta suburb of Smyrna.  The new 15,000 square foot facility will be the main fulfillment point serving customers throughout the Southeastern U.S.  The new branch will handle both product distribution and sales support for Professional Plastics' customers in Georgia, Florida, South Carolina, Tennessee, Alabama and Mississippi. 


Stock materials include; Delrin, Acetal, Nylon, Teflon PTFE, PVC, UHMW, PVDF, Ultem, Acrylic, Plexiglass, ABS, HDPE, Polycarbonate, Vespel, Meldin, Torlon & other industrial products. 


Professional Plastics was established in 1984' and has an annual turnover in excess of $ 100 million dollars.

Customers and job applicants are welcome to contact Professional Plastics for further details.

For more information, contact:
George Taylor g.taylor@proplas.com or John Casey j.casey@proplas.com . 

Professional Plastics, Inc.
5500 South Cobb Dr
Building # 400-1
Smyrna, GA. 30080
Local Phone: (888) 259-9641
Local Fax: (770)739-1131
www.professionalplastics.com

Friday, April 20, 2012

Fluorosint® HPV Wear Resistant, FDA-Compliant PTFE Bearing Material

Fluorosint® HPV PTFE - Most Wear Resistant Fluorosint Grade - Outlasts Low-Tech PTFE Based Materials.

Quadrant's FDA-compliant Fluorosint HPV is a mica-filled high-performance bearing grade that can deliver a pressure velocity (PV) performance improvement of more than 40 per cent over other PTFE materials according to in-house tests conducted by Quadrant. Parts made of Fluorosint HPV can withstand higher loads and velocities while delivering better wear resistance, enabling the part to last longer compared to existing FDA-compliant PTFE-based materials. The product was specially developed to meet the demands of high-performance bearing applications where other, low-technology PTFE formulations would exhibit premature wear or not perform adequately. These characteristics, together with FDA compliance for food and pharmaceutical applications, open up interesting new options for engineers and manufacturers. Simply put, parts machined from Fluorosint HPV last longer than those made from many of the alternative filled PTFE materials on the market today. Fluorosint HPV can replace bronze, steel and powdered metal parts and deliver performance gains in wear life and system performance. Typical applications include thrust washers, wear guides, seals and food processing and preparation equipment.

FDA compliant Fluorosint HPV PTFE is a high performance bearing grade of Fluorosint - optimized for high PV and very low "K" or wear factor. Fluorosint HPV PTFE was developed for bearing applications where other, low-tech PTFE formulations exhibit premature wear or simply cannot perform. FDA compliance gives food and pharmaceutical equipment manufacturers new design options and all benefit from its excellent load bearing and wear characteristics.
Features of Fluorosint® HPV PTFE:
  • Most Wear Resistant Fluorosint Grade - Outlasts Low-tech PTFE Based Materials

  • FDA compliant

  • Optimized for high PV and very low "K" or wear factor.

  • Developed for bearing applications where other low-tech PTFE formulations exhibit premature wear.

  • Typical applications include thrust washers, wear guides, seals and food processing and preparation equipment.


  • Professional Plastics supplies a full range of Fluorosint products through their 16 locations throughout the USA and Singapore.  Complete technical data and pricing is available online at:  http://www.professionalplastics.com/FluorosintHPV

    Thursday, May 27, 2010

    Tivar® H.O.T High Temperature UHMW-PE Shapes

    Tivar® H.O.T. from Quadrant EPP is formulated to maintain key performance properties in an extended temperature range, Tivar® H.O.T.* will excel in a variety of industrial manufacturing environments where temperatures range up to 275° F, nearly 100° higher than competing UHMW-PE formulations.

    Tivar® H.O.T. reduces the oxidization rate of the material at higher temperatures thereby slowing material degradation and extending wear-life in chemical, elevated temperature and thermo-cycling environments. In many applications, Tivar® H.O.T. will last up to 10 times longer in higher temperature environments and has excellent wear and release characteristics


    Tivar® H.O.T. is also a great material for use in conveyor systems or other equipment that is frequently exposed to chemical washdowns in such industries as poultry/meat processing and packaging. It can be also be used in applications ranging from wearstrips for spiral conveyors in the baking industry to drag conveyor flights for moving bulk materials (corn) in grain elevators, or wearstrips for conveyor dryers in drying and dehydrating systems.


    Tivar® H.O.T. is white and available in the following standard sizes: 48" x 120" (1220mm x 3050mm) sheets with gauges ranging from 1/16" (1.5mm) to 6.0" (152mm) and 48" x 240" sheets with gauges ranging from 3/4" to 3". Other sizes are available on request. It can also be extruded in a variety of standard and custom profiles.
     
    Tivar® H.O.T Benefits:
    •Inhibits oxidation, extends material wear-life
    •Extended operating temperature range
    •Abrasion, corrosion, chemical, and moisture-resistant
    •Excellent release characteristics
    •Meets FDA guidelines, USDA and 3-A Dairy compliant

    Industries: 
    Baking - Conveyor manufacturing - Food processing & packaging - Meat & poultry processing - Pet food manufacturing


    Applications:
    Chain guides - Conveyor components - Drying equipment - Machined parts - Wearstrips, pads and plates
     
    Tivar® H.O.T. is available from Professional Plastics website at http://www.professionalplastics.com/TIVARHOT or call (888) 995-7767
     
    Tivar® H.O.T. is a registered tradename of Quadrant EPP.
    Tivar® H.O.T. is distributed by Professional Plastics, Inc.

    Wednesday, January 27, 2010

    Nylatron® GS Nylon Sheets and Rods Available Online

    Professional Plastics offers Nylatron® GS Nylon Sheets and Rods from their e-commerce website in a full range of sizes.  Nylatron® GS is a molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity when compared to unfilled Nylon. Nylatron GS provides a lower coefficient of linear thermal expansion than Nylon 101 . Nylatron materials can be extruded or cast into basic shapes for machining.  Nylatron GS is the Extruded Grade which is best for smaller parts, while Nylatron GSM is the Cast Grade which is more suitable for large parts. Both grades are available from Professional Plastics website.

    Nylatron GS parts maintain better fit and clearances than unfilled Nylon and have less tendency to seize as bearings.   This material is economical and easy to machine into complex parts.

    Nylatron GS Rods are available in standard 8 foot lengths.
    Nylatron GS Sheets are available in standard 24" x 48" sheets or can cut-to-size to customer specifications upon request.


    Nylatron® is a registered trade name of Quadrant EPP - supply partner to Professional Plastics, Inc.

    For more information, contact Professional Plastics, Inc. at (888) 995-7767 or E-Mail sales@proplas.com
    Order Online at http://www.professionalplastics.com/NYLATRONGS